bIrrlicht 2.0 - Blitz3D/BlitzMax/BlitzPlus Irrlicht 1.8.3 Wrapper

Tweet blitz3d blitzmax blitzplus dll toolbox
(Posted 2 years ago) RonTek

This is the full package with source of Irrlicht 1.8.3 Wrapper for Blitz3D/BlitzMax/BlitzPlus that AquaLung has provided on the old official site and I managed to save a copy of the original 7zip archive and not repackaged.

Author: Aqualung

bIrrlicht 2.0 (Irrlicht 1.8.3 Blitz Wrapper)

Download bIrrlict 2.0

more screenshots to follow..

(Posted 2 years ago) hardcoal commented:

Looks Cool.. I tried installing it but failed.. No Worries for now.. Im using Xors3D

(Posted 2 years ago) RonTek commented:

Thanks hardcoal and good to know. It has been a long time since I have tried this out, particularly the BlitzMax side and now reminds me to test this all over again.

(Posted 2 years ago) NRJ commented:

Thanks for the wrapper.

userlib not found error in blitz3d,I have followed the instructions given in the readme file .

(Posted 2 years ago) RonTek commented:

Hi NRJ, Welcome to the forums!

Sure thing and here's my recent test with old Blitz3D 1.106 and 1.108 (VS2015)

What I did was copy all five dlls (irrKlang.dll, d3dx9_43.dll, bIrrlicht.dll, Irrlicht.dll, ikpMP3.dll) either at userlibs folder or at example folder alongside the blitz3d example sources, it should work as shown here. The .decls file of course should be at userlib only folder.

(Posted 2 years ago) RonTek commented:

Hey hardcoal, it seems to work on vanilla Blitzmax too, so it would really help and figure out your issue if you can post your log errors or perhaps try a temp clean install in case your curious to check this out again? cheers

(Posted 2 years ago) NRJ commented:

I have done the same thing as you did, but still it is not working, I cannot figure out why it is not working, I have blitz version 1.108 .

(sorry for the English in my post)

(Posted 2 years ago) RonTek commented:

Hmm.. that's really odd. I would assume you got other userlibs working without any problems?

Would it be easy for you to try a clean B3D install (I would recommend the VS2015 edition and still C:/Blitz3D) and just rename your current installation folder, put it aside and see if this works?

(Posted 2 years ago) NRJ commented:

Currently working on 2d game only, I will try this again later.

Yes, other userlibs such as bullet physics works fine.

(sorry for the English in my post)

(Posted 2 years ago) RonTek commented:

That's great NRJ. Yes, let me know how it works as it should be fine on clean installs.

Reply To Topic (minimum 10 characters)

Please log in to reply